Cisco Catalyst 2950 Command Reference Manual page 643

Appendix C Catalyst 2950 and 2955 Switch Debug Commands
Related Commands Command
auto qos voip
show auto qos
show debugging
OL-10102-01
Description
Configure auto-QoS for voice over IP (VoIP) within a QoS domain.
Displays the configuration applied and the new defaults in effect when
auto-QoS is enabled.
Displays information about the types of debugging that are enabled. For syntax
information, select Cisco IOS Configuration Fundamentals Command
Reference for IOS Release 12.1 > Cisco IOS System Management
Commands > Troubleshooting Commands.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
debug auto qos
C-3