Reassembly And Remounting - Suzuki drz 400E Service Manual

6-22 CHASSIS
Drive out the steering stem upper and lower bearing races
using the special tools.
09941-54911: Bearing outer race remover
09941-74910: Bearing installer

REASSEMBLY AND REMOUNTING

Reassemble and remount the steering stem in the reverse order
of removal and disassembly. Pay attention to the following points.
BEARING RACES
Press in the upper and lower bearing races using the special
tools.
09924-84510: Bearing installer set
09941-34513: Steering race installer
BEARINGS
Press in the steering stem lower bearing using the special
tool.
09925-18010: Steering bearing installer
Apply SUZUKI SUPER GREASE "A" to the steering stem
upper and lower bearings.
For USA
99000-25030: SUZUKI SUPER GREASE "A"
For the other countries
99000-25010: SUZUKI SUPER GREASE "A"
STEERING STEM
Tighten the steering stem nut to the specified torque using
the special tools.
09940-14911: Steering nut socket wrench
09940-14960: Steering nut wrench socket
Steering stem nut: 45 N·m (4.5 kgf-m, 32.5 lb-ft)