Reassembly And Remounting - Suzuki GSX1200 1999 Service Manual

5-8 CHASSIS

REASSEMBLY AND REMOUNTING

Reassemble and remount the front wheel in the reverse order of
removal and disassembly. Pay attention to the following points:
WHEEL BEARINGS
• Apply SUZUKI SUPER GREASE "A" to the bearings before in-
stallation.
$ 99000-25010: SUZUKI SUPER GREASE "A" $ $
$ $
• Install the wheel bearings using the used bearings and special
tool as described below.
' ' 09924-84510: Bearing installer set ' ' '
%
First install the left wheel bearing, then install the right
! ! 5-5) !
!
wheel bearing. (!
The sealed cover on the bearing must face to the out-
side.
BRAKE DISCS
• Make sure that the brake discs are clean and free of any grease.
Apply THREAD LOCK SUPER "1360" to the brake disc bolts
and tighten them to the specified torque.
# # # # 99000-32130: THREAD LOCK SUPER "1360" #
" "
" " Brake disc bolt: 23 N . m (2.3 kgf-m) "
SPEEDOMETER GEARBOX
• Before installing the speedometer gearbox, apply grease to the
dust seal lip.
• Align the drive lugs 1 with the recesses 2 on the wheel hub
and then fit the speedometer gearbox onto the wheel hub.
$ $
$ $ $ 99000-25010: SUZUKI SUPER GREASE "A"
• Have the stopper on the speedometer gearbox touch the lug
3 on the left front fork leg.