Reassembly And Remounting - Suzuki DR-Z400S 2001 Service Manual

6-8 CHASSIS

REASSEMBLY AND REMOUNTING

Reassemble and remount the front wheel in the reverse order of
removal and disassembly. Pay special attention to the following
points:
WHEEL BEARINGS
Install the wheel bearings using the special tool.
09924-84521: Bearing installer set
First, install the left wheel bearing, and then install the
right wheel bearing. (
WHEEL HUB DUST SEAL
Apply SUZUKI SUPER GREASE "A" to the lip of dust seal.
For USA
99000-25030: SUZUKI SUPER GREASE "A"
For the other countries
99000-25010: SUZUKI SUPER GREASE "A"
Install the wheel hub dust seal using the special tool.
09913-70210: Bearing installer set
BRAKE DISC
Make sure that the brake disc is clean and free of any grease.
Apply THREAD LOCK SUPER "1360" to the brake disc mount-
ing bolts, and then tighten them to the specified torque.
99000-32130: THREAD LOCK SUPER "1360"
Brake disc mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
6-4)