Oil Seals - Suzuki drz 400E Service Manual

OIL SEALS

Damage to the lip of the oil seal may result in leakage of the air/
fuel mixture or engine oil. Inspect the oil seal for wear or dam-
age. If any damages are found, replace the oil seal with a new
one.
Install the oil seals into the crankcase, clutch housing case,
and generator rotor cover. Pay attention to the following points:
Replace the removed oil seals with new ones.
Apply SUZUKI SUPER GREASE "A" to the lip of the oil seals.
For USA
99000-25030: SUZUKI SUPER GREASE "A"
For the other countries
99000-25010: SUZUKI SUPER GREASE "A"
DRIVESHAFT OIL SEAL
Remove the collar 1 and retainer 2.
Remove the driveshaft oil seal from the left crankcase using
the special tool.
09913-50121: Oil seal remover
Replace the removed oil seal with a new one.
ENGINE 3-45
2
1