Cylinder Head - Suzuki drz 400E Service Manual

3-60 ENGINE
Install the dowel pins 1 and new gasket 2 onto the crank-
case.
Use a new gasket to prevent oil leakage.
Hold each piston ring with the piston ring sections positioned
correctly and put it into the cylinder. Make sure that the piston
rings are caught by the cylinder skirt.
NOTE:
When mounting the cylinder, after attaching the camshaft
drive chain, keep the camshaft drive chain taut. The cam-
shaft drive chain must not be caught between the cam drive
chain sprocket and crankcase when the crankshaft is rotated.
NOTE:
There is a holder for the bottom end of the cam chain guide
cast in the crankcase. Make sure that the guide 1 is inserted
properly or binding of the cam chain and guide may result.

CYLINDER HEAD

Install the dowel pins 1 and new gasket 2.
Use a new cylinder head gasket to prevent gas leak-
age.
2
1
1
1
2