Battery (Dr-Z400E); Initial Charging - Suzuki drz 400E Service Manual

10-22 DR-Z400/EK1 ('01-MODEL)

BATTERY (DR-Z400E)

SPECIFICATIONS
Type designation
Capacity

INITIAL CHARGING

Filling electrolyte
• Remove the aluminum tape 1 sealing the battery electrolyte
filler holes.
• Remove the caps 2.
NOTE:
* After filling the electrolyte completely, use the removed cap 2
as the sealed caps of battery-filler holes.
* Do not remove or pierce the sealed areas 3 of the electrolyte
container.
• Insert the nozzles of the electrolyte container into the battery's
electrolyte filler holes, holding the container firmly so that it does
not fall. Take precaution not to allow any of the fluid to spill.
• Make sure air bubbles are coming up each electrolyte container,
and leave in this position for about more than 20 minutes.
YT7B-BS
12V, 21.6 kC (6 Ah)/10HR