ENGINE DISASSEMBLY
Remove the cap bolt 1 and cam chain tension adjuster 2.
Remove the top-dead-center (TDC) plug 3 and generator
cover cap 4.
Turn the generator rotor until the "T" line on the generator
rotor is aligned with the center of the hole in the generator
cover.
NOTE:
When removing the cylinder head cover, the piston must be at
TDC of the compression stroke.
Remove the spark plug.
Remove the cylinder head cover bolts in diagonal stages,
and then remove the cylinder head cover.
ENGINE
2
3
4
T T
3-11
1