Chapter 1 Before Use; About Installing This Machine; Where To Install This Machine; Working Environmental Temperature - MIMAKI TS500P-3200 Operation Manual

Chapter 1 Before Use

About installing this
machine

Where to Install This Machine

Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Model Width
TS500P-
5620mm
3200
External ink
950mm
supply unit
*1. When the tension bar is flat
500 mm or more
• The external heater is not attached to this
machine. It is necessary to prepare it separately.
• Install the external heater in the proper place
considering the usage environment and the
specifications of the external heater.

Working Environmental Temperature

Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
The heater temperature may not reach the set value,
depending on the ambient temperature.
1-2
Gross
Depth Height
weight
*1
1800mm 1820mm 1500kg
510mm 730mm 30kg
500 mm or more

About fixing machine

The leg of this machine has the level foot to fix the
machine.
Before turning the power ON, make sure that the printer
body is fixed with the leveling feet. The printer body may
start moving during operation if it is not fixed with the
leveling feet.
• Put the supplied iron base plate (black) between
each leveling foot and the floor. To hold the weight
of the printer, using plate is recommended.

Moving This Machine

• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur.
Be sure to request your distributor or our service
office to move this machine.