Cutter Blade And Slot For Cutting; Indicator; Capping Station; Pinch Rollers And Feed Rollers - MIMAKI TS500P-3200 Operation Manual

Chapter 1 Before Use

Cutter blade and slot for cutting

The carriage is provided with a cutter unit for cutting off
the media that has been printed on.
The cutter cuts off the sheet of media along the slot for
cutting on the platen.
The cutter blade is consumables. If it gets dull, replace it
with new one.
slot for cutting Cutter unit

Indicator

Functions of the Indicator on the top right of this unit are
described here.
The indicator has a green and a red lamp.
Red
Green
Color of
State
lamp
Lighting REMOTE
Green
Blinking REMOTE (printing)
Off LOCAL
Lighting Error has occurred (system down)
Red
Blinking Error or warning has occurred
Off Normal
1-8
State of machine

Capping station

• Be sure to wear the attached goggles in cleaning
within the capping station to protect your eyes
against ink. Otherwise, you may get ink in your
eyes.
The capping station consists of the ink caps, the wiper for
cleaning the heads, etc.
The ink caps prevent the nozzles in the heads from drying
up.
The wiper cleans the nozzles in the heads.
The wiper is consumable.If the wiper is deformed or the
media is stained, replace the wiper with a new one. (

Pinch rollers and Feed rollers

• Keep the pinch rollers lifted up when this machine
is not in use. If the pinch rollers are left lowered for
an extended period of time, they can be deformed
and fail to securely retain the media.
This machine retains the media with the pinch rollers and
feed rollers. During printing operation, the feed rollers
feed the media forward.
Pinch roller
)
Feed roller