MIMAKI TS500P-3200 Operation Manual page 60

Chapter 3 Setup
Setting the Nozzle Check
Select ON when you want to conduct nozzle check during
online printing.
1
Press
• Nozzle Check menu will be displayed.
2
Press
press the
• Setup menu appears.
3
Press the
4
Press
Maint." and press the
5
Press
and press the
6
Select "ON", and press
7
Press
press the
• select the nozzle check interval from "LENGTH"
or "FILE".
• Length : nozzle check is conducted when the
printed length reaches the set length.
• File : nozzle check is conducted when the
number of printed files reaches the set
number.
• Time : When the print time reaches the time
set, perform the nozzle check.
8
Press
and press the
• The set value will differ according to the setting
selected in Step 5.
• Length : 0.1 to 100.0m (in 0.1m increment)
• File : 1 to 1000 (in 1 file increment)
• Time : 10 to 120min (in 10min increment)
9
Press the
10
Press
and press the
• Setting value : Soft/ Normal/ Hard / Auto
• オートを選択した場合、ノズルの復旧具合に応じ
て、自動的に最適なクリーニングを実施します。
11
Press
and press the
3-14
in LOCAL.
(MENU)
to select SETUP 1 to 4, and
key.
(>>) twice .
to select "Auto Nozzle
key.
to select "Nozzle Check"
key.
.
to select setting item, and
key.
to select setting value,
key.
key.
to select cleaning type,
key.
to select "Retry Count",
key.
12
Press to select retry count, and
press the
• Setting value : 0 to 3
13
Press to select "Auto Nozzle
Recovery", and press the
14
Press to select "Judgement
Condition", press
line and color, and press the
15
Press to set the number of
nozzles for judgment, and press the
key.
• Setting value : 0 to 100 / OFF
• When set to "OFF", the nozzle check is not
performed.
16
Press
key.
key.
to select head
key.
key to end the setting.