Operation Panel - MIMAKI TS500P-3200 Operation Manual

Operation Panel

Use the operation panel to make settings for printing or operate this machine.
key
Changes over the functions of the
function keys ([FUNC1]–[FUNC3]).
/ /
Press this to set various functions or
to do test printing. The function
keys' functions are changed each
time [SEL] key is pressed.
JOG key
Use these keys to shift the carriage or
the media in [LOCAL]. Also use them to
select an item of printing conditions.
key
Cancels the last input value or returns
the setting menu to the immediate
higher level of the hierarchy. Also, press
this to turn the power on or off. (Give it a
long press to turn the power off.)
key
Registers the last input value as the
setting value or goes to the immediate
lower level of the hierarchy.
• The [ENTER] key under the operation panel lights in blue when the power is turned on, and off when the power switch
is turned off. The ink clogging prevention function is periodically operated even when the power switch is OFF if the
main power switch keeps being ON. (Auto maintenance function)
*1 : Ink Status
Status of the ink tank (remaining ink/error, etc.) is displayed using icons. Each icon is described below.
Icon
Displays the remaining ink amount in nine levels, in the order of the ink cartridge set in the slot. The remaining
amount decreases moving to the right.
ink full
Indicates that the ink cannot be used due to ink end or ink error.
Indicates that ink has expired or that one month has passed after the expiration date. Please use quickly. Ink can no
longer be used if two months have passed after the expiration date.
Local <Setup 1>
PRINT POST 1L
25° C 34° C 50° C 30° C 32° C
key
MENU
Status indicator lamp
Indicates the machine's status (printing, error occurred, etc).
Condition of Lamp
OFF
Lit steady Light blue
Flashing Light blue
Lit steady blue
Flashing red
Lit steady red
Approximately Approximately Approximately
1/8 consumed 1/4 consumed. 3/8 consumed.
12:00
1340mm
POST 2L POST 1R POST 2R
TEST PRINT /
REMOTE
CLEANING
Condition of machine
Machine is in LOCAL mode, no print data has been
received, and no errors have occurred.
Switched to Remote mode.
Currently printing.
In test printing: printing a pattern stored inside the
machine.
Print data still remains in the machine.
Error has occurred.
Error (SYSTEM HALT) has occurred.
P.1-4
Contents
Approximately Approximately
1/2 consumed. 5/8 consumed.
Chapter 1 Before Use
Display
Displays the following items:
• Printer status
• Time Display
• Set media width
• Heater temperature (current tem-
perature/set temperature)
*1
• Ink status
• Functions assigned to [FUNC1]
*2
to [FUNC3]
Approximately Approximately
near end
3/4 consumed. 7/8 consumed.
1
2
2
2
2
1-5