Setting The Heater; Setting Of Logical Seek - MIMAKI TS500P-3200 Operation Manual

Chapter 3 Setup

Setting the Heater

Print heater / Post-heater are equipped on the platen.
Type of HEATER
Print-heater Improves the image quality in printing.
Dries ink after printing.
There are the left post heater (1/2) and right
Post-heater
post heater (1/2) in accordance with the
printing method on this machine.
1
Press the
Local.
2
Press
press the
• Setup menu appears.
3
Press
press the
4
Press
the key.
• Heater : Print-heater, Post-heater (1L/1R/2L/2R)
5
Press
temperature , and press the
• Print and Post-heater (1L/1R) temperature
OFF/ 20°C to 60°C
• Print-heater and Post-heater (2L/2R) temperature
OFF/ 20°C to 70°C
6
Press
HEATER" and press the
• Heater : Print-heater, Post-heater (1L/1R/2L/2R)
7
Press
press the
8
Press the
end the setting.
3-8
Function
key in
(MENU)
to select SETUP 1 to 4, and
key.
to select "Heater" , and
key.
to select heater , and press
to set the heater
key.
to select "EXTERNAL
key.
to select ON/OFF, and
key.
key several times to

Setting of Logical Seek

The head's operation varies depending on the Logical
Seek settings, as shown in the figure below.
Movement of heads when LOGICAL seek is OFF
UNI-DIRECTIONAL
Media
Print erea
Red arrow : Movement of head
Movement of heads when LOGICAL seek is ON
UNI-DIRECTIONAL
Media
Print erea
Red arrow : Movement of head
1
Press the
Local.
2
Press to select SETUP 1 to 4, and
press the
• Setup menu appears.
3
Press to select "Logical Seek",
and press the
4
Press to select a set value, and
press the
• Set value : Host / ON / OFF
5
Press the
end the setting.
BI-DIRECTIONAL
Media
BI-DIRECTIONAL
Media
key in
(MENU)
key.
key.
key.
key several times to