MIMAKI TS500P-3200 Operation Manual page 93

6
Insert the IC chip included with the 2 liter
ink bottle.
• When an IC chip is inserted into the printer and
the information on the IC chip is loaded, the
display will change as shown on the right.
• IInsert the IC chip with the metal part facing rear
side and down. If you insert the wrong side by
accident, it causes faulty or damage of the IC
chip.
• Do not touch the metal part of the IC chip. It may
break the IC chip by static, or may cause read
error by stain or flaw.
Metal part facing
rear side
Down
C H A R G E I N K : T A N K
P L E A S E I N S E R T
• If the inserted IC chip is near its expiration date, a
confirmation screen will appear. If OK, press [].
E x p i r a t i o n
C H A RG E A N YWA Y ?
E x p i r a t i o n
NO <
E x p i r a t i o n : 1 MON T H
C H A RG E A N YWA Y ?
E x p i r a t i o n : 1 MON T H
NO <
• If there is a problem with the inserted IC chip and
you can not charge , the display shows the reason.
• If there are multiple problems, use [][] to scroll
through them.
IC chip inserting port
1 - M
I N K I C
Displayed
alternately
> Y E S
Displayed
alternately
> Y E S
7
When the "CHARGE START" confirmation
screen appears, press
• Charging starts.
• The ink information on the IC chip appears in the
display.
• While the ink is charging, the screen is displayed
*Ink Charge*.
Do not remove the IC chip or turn the printer off.
8
When charging is complete, the buzzer will
sound momentarily and then the screen will is
display the messsage "Complete Ink Charge".
• To check the volume and expiration date of the ink
that has been charged, press the [ENTER] key in
Local. (P.3-28)
Chapter 4 Maintenance
.
4-19
4
2