MIMAKI TS500P-3200 Operation Manual page 70

Set the server
1
Press the
2
Press
and press the
3
Press the
4
Press
and press the
5
Press
press the
6
Press
and press the
7
Press
and press the
8
Press
Address and press the
• Press the jog key [][][][] to set SMTP
address.
• Input the SMTP address name.
9
Press
and press the
10
Press
press the
• Set the SMTP port number.
11
Press
Address" and press the
12
Press
Address and press the
• Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
13
Press
and press the
3-24
(MENU) in Local.
to select "Machine Setup"
key.
(>>) twice.
to select "Network & Mail"
key.
to select "Event Mail" , and
key.
to select "Server Setup"
key.
to select "SMTP Address"
key.
to set SMTP
key.
to select "SMTP Port No." ,
key.
to set SMTP Port No. and
key.
to select "Sender Mail
key.
to set Sender Mail
key.
to select "Authentication"
key.
14
Press to set authentication
method, and press the
• Set the authentication method of the SMTP
server.
• When you select [POP before SMTP], proceed to
the Step 15.
• If you select [SMTP Authentication], after the
operation of the steps 15-18, go to step 23.
• When you select [OFF], proceed to the Step 23.
15
Press to select "User Name" and
press the
16
Press
and press the
• Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
17
Press to select "Password" and
press the
18
Press
and press the
• Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• On the password setting screen, you can
only check the value that you are currently
inputting.
19
Press to select "POP3 Address"
and press the
20
Press
Address and press the
• Press [][][][] to set POP server.
• Input the POP server name.
21
Press to select "APOP" and
press the
22
Press to set ON/ OFF and press
the key.
23
Press the
end the setting.
key.
key.
to set User Name
key.
key.
to set Password
key.
key.
to set POP3
key.
key.
key several times to