MIMAKI TS500P-3200 Operation Manual page 103

10
When the correction processing is finished
successfully, remove all the weights on the
dish of the balance and press the
key.
• Perform the correction processing without the
weight on the balance.
• During the correction process, please do not give
vibration to the external ink supply unit. There is a
possibility to fail the correction process.
• When the correction process fails, "Failed" will be
shown on the display. Press the [ENTER] or
[END] key to clear the error display and press
again the [ENTER] key. It will resume the
correction processing.
11
When the correction processing is finished
successfully, set the ink tank that was
removed in step 8 and press the
key.
Correct by the correction method
"Adjust Zero Pos."
1
Press the (MENU) in LOCAL.
2
Press to select "Maintenance",
and press the
3
Press the (>>) .
4
Press to select "Tank
Calibration", and press the
5
Press to select "Adjust Zero
Pos." and press the
6
Press to select an ink tank (Slot 1
to 8) to be corrected, and press the
key.
7
Remove the ink tank of the selected slot
and press the
• Perform the correction processing without the
weight on the balance.
• During the correction process, please do not give
vibration to the external ink supply unit. There is a
possibility to fail the correction process.
• When the correction process fails, "Failed" will be
shown on the display. Press the [ENTER] or
[END] key to clear the error display and press
again the [ENTER] key. It will resume the
correction processing.
8
When the correction processing is finished
successfully, set the ink tank that was
removed in step 7 and press the
key.
Chapter 4 Maintenance
key.
key.
key.
key.
4-29
4
2