Setting Take-Up Unit; Setting The Display Of Media Remain; Setting Time; Setting Unit (Temperature/ Length) - MIMAKI TS500P-3200 Operation Manual

Setting Take-up unit

For setting whether the take-up unit is used or not used.
1
Press the
2
Press to select "Machine Setup"
and press the
3
Press to select "Take-up Unit"
and press the
4
Press to select ON/ OFF, and
press the
5
Press the
end the setting.

Setting the Display of Media Remain

Whether the screen displays the remaining amount of a
media is set.
the remaining amount of a media is
When the media
displayed in Remote.
remaining amount
(However, when a leaf media is used,
display is turned to
the length of the media to be printed is
"ON"
displayed.)
When the media
remaining amount the remaining amount of a media is not
display is turned to displayed in the Remote.
"OFF"
• The displayed amount of a media is a rough
indication. It may be different from the actual
remaining amount.
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-11)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
1
Press the
2
Press to select "Machine Setup"
and press the
3
Press to select "Media Remain"
and press the
4
Press to select ON/ OFF, and
press the
5
Press the
end the setting.
(MENU) in Local.
key.
key.
key.
key several times to
(MENU) in Local.
key.
key.
key.
key several times to

Setting Time

You can set time of your country (time difference).
1
Press the
2
Press to select "Machine Setup"
and press the
3
Press to select "Time Set" and
press the
• The time that is currently set is displayed.
4
Press the
mode.
5
Press
press the
• Time/ Minute/ Second selecting:
by the [][] keys.
• Time/ Minute/ Second inputting:
by the [][] keys.
6
Press the
end the setting.
• -20 hours to +4 hours can be set.

Setting Unit (Temperature/ Length)

Units used by this machine are set.
1
Press the
2
Press to select "Machine Setup"
and press the
3
Press the
4
Press to select "Unit/Temp" or
"Unit/Length" and press the
5
Press to select a set value, and
press the
• Set value of tempture : °C / °F
• Set value of length
6
Press the
end the setting.
(MENU) in Local.
key.
key.
(  ) to shift to time input
to enter time, and
key.
key several times to
(MENU) in Local.
key.
(>>) .
key.
key.
: mm / inch
key several times to
3
2
2
3-19