Table of Contents
Advertisement
Chapter 7. SLT Features
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
5. Enter a trunk access code.
6. Dial the phone number.
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) can be
allowed to make outgoing calls by entering a Verified Account code that changes the TRS.
After a call is made, the SMDR record for the call will show the verified account code.
Operation
To make an outside call that requires an account code:
1. Lift the handset.
2. Enter the Verified Account ID code (default = 8#).
3. Enter the Account Code (max. 10 digits).
4. Press the # key.
5. Enter a trunk access code.
6. Dial the phone number.
Hardware Requirements
•
An SMDR printer or external call accounting system is required to collect account code records.
Related Programming
•
FF1-0-19: TRS Class for Forced Account Code
•
FF1-2: Dial Plan
•
FF3: Forced Account
•
FF3: Verified Account
•
FF8-1-04: Verified Account Codes with TRS Class
Considerations
•
Account codes are not available during conversation recording mode for the Built-In Voice Mail.
•
Even though up to 10 digits may be entered, the system verifies the ID based on the first 4 digits
only.
•
Account codes will be cancelled after using CO queuing.-
•
Account codes are not available for a Dial Pulse SLT.
•
SLT telephones can only use account codes with outgoing calls only.
252
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Result
Intercom dial tone
576-13-700
Advertisement
Table of Contents
