Table of Contents
Advertisement
Section 700 - Operation
Callback Request
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you dial a busy extension, you can have the System call you back when that extension becomes
free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
1. Lift the handset.
2. Dial the extension number.
3. Enter the Callback Request code (default = 3).
4. Replace the handset after you hear the ringback tone.
To respond to the callback request:
1. Lift the handset.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Callback Request Send)
•
FF1-0-03: Extension COS (Callback Request Receive)
•
FF3-0: Extension COS
Considerations
•
N/A
Call Forwarding
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Call Forwarding allows you to send your calls to another extension, to an outside line, or to voice
mail. Call Forwarding can be set or canceled under the following conditions from either your own
extension or from an alternate extension:
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 7. SLT Features
Result
Intercom dial tone
Busy tone
Ringback tone
System calls back when called extension
becomes free
Result
System automatically redials extension
255
Advertisement
Table of Contents
