Section 700 - Operation
Operation
To use Extension Busy Override:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Busy Override code (default = 9).
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-01: Splash Tone (Busy Override)
•
FF1-0-03: Extension COS (Manual DND Override Send)
•
FF1-0-03: Extension COS (Forced DND Override)
•
FF1-2: Dial Plan
•
FF3: Extension COS
•
FF3: Data Security
Considerations
•
You cannot break in on three-party conference calls.
•
The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.
Callback Request
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you dial a busy extension, Callback Request enables the System to call you back when that
extension becomes free. When you answer, the System automatically rings the called party again.
Operation
To set a Callback Request:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 6. DSLT Features
Result
Intercom dial tone
Busy tone
• Alert tone sounds to both extensions
(system programming required)
• Connected to both parties
Result
Intercom dial tone
Busy tone
209