Table of Contents
Advertisement
Chapter 3. System Features
•
DID Day/Night Ringing
•
DID Day/Night Busy/Delayed Ringing
•
Busy Lamp Field Ringing
•
Busy Lamp Field Delayed Ringing
•
Slide Ringing
•
Alarm Ringing
Day 1/ Day 2/Night Ringing
When the System is in Day 1 mode, calls can be directed to ring at one or more extensions or at a hunt
group per the Day 1 ringing assignments.
When the System is in Day 2 mode, calls can be directed to ring at one or more extensions or at a hunt
group per the Day 2 ringing assignments.
When the system is in Night mode, call can be directed to ring at one or more extensions or at a hunt
group per the Night ringing assignments.
Inbound calls can be directed to desired normal daytime locations by setting the system into a Day
mode. By having a second day mode (Day 2) alternative call handling is available during day
operation. For instance, during lunch, calls can be directed to an alternative position.
Calls can be directed specific night locations when the system is set to Night mode.
For more information on Day Ringing, see "Day/Night System Mode" on page 37.
Hardware Requirements
•
N/A
Related Programming
•
Considerations
•
N/A
Day 1/ Day 2/Night Delayed Ringing
CPC-96, CPC-288, and CPC-576 Version 1.0
Delayed Ringing causes an incoming outside call that is unanswered at a primary extension within a
certain period of time, to ring at a designated extension or extensions. Delayed ringing destinations
can be set for Day1, Day 2 and Night modes. CO Delayed Ringing is also available for hunt group
pilot numbers.
Hardware Requirements
•
N/A
Related Programming
•
FF2: Trunk Setting (Ringing Assignments)
•
FF11-02: Delayed Timer (Day 1/Day2/Night)
Considerations
•
N/A
60
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
576-13-700
Advertisement
Table of Contents
