Table of Contents
Advertisement
Chapter 6. DSLT Features
Operation
To set Call Forwarding - Busy:
1. Lift the handset or press the ON/OFF key.
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 722.
• For another extension, enter 742.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you want to forward
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see "Speed Dialing" on page 238.)
5. Replace the handset or press the ON/OFF key.
To cancel Call Forwarding - Busy:
1. Lift the handset or press the ON/OFF key.
2. Enter the appropriate Cancel Call Forwarding code:
3. For your extension, enter 732.
4. For another extension, enter 752.
5. If canceling Call Forwarding for another extension, dial the
extension number.
6. Replace the handset or press the ON/OFF key.
Call Forwarding - No Answer
When Call Forwarding - No Answer is set, a call will ring until the Call Forward - No Answer timer
expires. When the timer expires, the unanswered call is forwarded.
212
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
576-13-700
Advertisement
Table of Contents
