Table of Contents
Advertisement
Section 700 - Operation
•
N/A
Intercom Calling
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System provides two methods of intercom calling:
•
Voice Calling: Extension calls are connected immediately, without a ringing tone.
•
Tone Calling: A ringing tone is sent to the called extension.
Extension Class of Service (COS) programming determines whether the default for the originating
extension is voice or tone calling. Regardless of the default, you can toggle between voice or tone
calling by entering the Tone-Voice Call feature code. For example, if the extension default is tone
calling, you can make a voice call to another extension by entering the Tone-Voice Call feature access
code.
Operation
To make a call using Intercom Calling:
1. Lift the handset.
2. Dial the extension number.
3. If your extension is set for tone calling and you want to
make a voice call, enter 1.
Or, if your extension is set for voice call and you want to
make a tone call, enter 1.
4. Speak when your call is answered
5. Replace the handset.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Intercom Calling Type)
•
FF1-0-03: Extension COS (Voice Call Send)
•
FF1-0-03: Extension COS (Voice Call Receive)
•
FF3: Extension COS
Considerations
•
Both the called and calling parties must belong to an Extension COS that allows Voice Calling.
•
You cannot change from voice calling to tone calling.
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 7. SLT Features
Result
Intercom dial tone
275
Advertisement
Table of Contents
