Table of Contents
Advertisement
Section 700 - Operation
•
Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal unless your system allows Paging Override.
Reset Call
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
Operation
To use Reset Call to dial another extension (after a busy extension):
1. Lift the handset.
2. Dial an extension.
3. Enter the last digit of the next extension.
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
Considerations
•
The second extension called using the Reset Call feature must have the same number of digits as
the first extension.
Speed Dialing
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
•
System Speed Dial (SSD)
•
Speed Dial Linking
•
Speed Dial Name Assignment
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 7. SLT Features
Result
Intercom dial tone
Busy tone
281
Advertisement
Table of Contents
