Table of Contents
Advertisement
Chapter 7. SLT Features
•
The attendant pilot number is flexible.
•
If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
•
Attendant calls are always tone calls (i.e., not voice calls).
Busy Override
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Busy Override allows you to break into another user's outside or intercom calls to relay urgent
information or to create three-party conference calls.
Operation
To set Extension Busy Override:
1. Lift the handset.
2. Dial the extension number.
3. Enter the Busy Override code (default = 9).
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-01: Splash Tone (Busy Override)
•
FF1-0-03: Extension COS (Manual DND Override Send)
•
FF1-0-03: Extension COS (Forced DND Override)
•
FF1-2: Dial Plan
•
FF3: Extension COS
•
FF3: Data Security
Considerations
•
You cannot break in on three-party conference calls.
•
The default for the override alert tone is off. If the override alert tone is enabled, the tone will be
sent to both parties when a call is overridden.
254
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
Busy tone
• Alert tone sounds to both extensions
(System programming required)
• Connection to both parties
576-13-700
Advertisement
Table of Contents
