Section 700 - Operation
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the CO line of the incoming
call.
Note:
For details about handling multiple calls, see "Call Hold" on page 124.
Hardware Requirements
•
N/A
Related Programming
•
FF3: CO Off-Hook Signal.
Considerations
•
The CO call type may be multiple ring, direct, BLF Ring, or camp-on.
•
The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
All Versions
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can also
transfer a held call to a busy extension after making the announcement using this feature. The called
party may optionally reply to (answer) an OHVA call.
Operation
To make an OHVA :
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 5. Key Telephone Features
Result
First call on hold
Result
Busy signal
171