Set System Speed Dial Index - Panasonic 524X07801B Technical Manual

Panasonic phone operating instructions
Table of Contents

Advertisement

Chapter 4. User Maintenance
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD names, press the volume up or down
key or press the HOLD key to move to the desired SSD.
14. Repeat steps 9-13 until all SSD names are entered.
15. Press the AUTO key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
N/A
Related Programming
N/A
Considerations
N/A

Set System Speed Dial Index

Description
For a description of System Speed Dial (SSD), see "System Speed Dial" on page 181 for a Digital
Key Telephone, "System Speed Dial" on page 240 for a Digital Single Line Telephone (DSLT), and
"System Speed Dial" on page 283 for a Single Line Telephone (SLT).
Operation
To set SSD index using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 02.
3. Press the HOLD key.
4. Enter 2.
84
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Next SSD bin number displays
Desired SSD bin number displays
Enter SSD # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8102-
SSD Assignment displays
576-13-700

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs 576

Table of Contents