Table of Contents
Advertisement
Chapter 7. SLT Features
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
Operation
To use Trunk Direct Pickup:
1. Lift the handset.
2. Enter the Trunk Direct Pickup code (default = *0).
3. Dial the number of the ringing
4. Complete the call and replace the handset.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
Considerations
•
Calls on exclusive hold cannot be picked up.
Call Transfer
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System allows you to transfer calls to either another extension or to an outside number. The
transferred calls can be either supervised or unsupervised. (You can also use the Camp-on feature to
transfer a call to a busy extension.)
Supervised Transfer
When completing a supervised transfer, the transferring party remains on the line until the third party
answers, then he/she announces the call.
Operation
To supervise the transfer of a call to another extension:
1. While on a call, hookflash to place the call on hold.
2. Dial the extension number to which the call is to be trans-
ferred.
266
Action
or holding (system)
Action
DBS 576 (USA), Revised 6/11/98
Intercom dial tone
trunk.
Intercom dial tone
Section 700 - Operation
Result
Result
576-13-700
Advertisement
Table of Contents
