Floating Hold - Panasonic 524X07801B Technical Manual

Section 700 - Operation
To retrieve a call placed on System Hold from an extension other than the one that put
it there:
1. Press the line key that is flashing red.
To retrieve a held call on a specific trunk:
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.
Hardware Requirements
• N/A
Related Programming
• FF1-0-01: Floating Hold on HOLD Key
• FF1-0-03: Extension COS (Hold Key Operation)
• FF1-2: Dial Plan
Considerations
• N/A

Floating Hold

Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension that
has an FF key assigned to the same Floating Hold orbit where the call is held. You can also retrieve a
call by dialing the Floating Hold orbit number for the held call.
Floating Hold is useful when the intended recipient of a call must be located via a page. The call can
be placed in a Floating Hold "orbit" and that orbit number announced during the page. The paged
party can then pick up the call by dialing the orbit number or by pressing an FF key assigned to that
orbit number.
Note:
To place a call on Floating Hold, you should have at least one FF key assigned to a Floating
Hold orbit number (001-576).
Operation
To place a call on Floating Hold:
1. While on a call, press the Floating FF key (system program-
ming required) or press the HOLD key.
576-13-700
Action
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 5. Key Telephone Features
Result
CO XXX displays (where XXX = outside
line number)
Result
Intercom dial tone
Enter TRK # displays
Result
• Intercom dial tone
• Hold CO XXX displays (where XXX
= outside line number)
125