Table of Contents
Advertisement
Chapter 6. DSLT Features
•
Account Codes interact with TRS as shown in the following table:
Forced or Not Forced
Not Forced
Forced
Attendant Group Calls
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
You can call the attendant group from any extension by dialing the designated attendant number.
Operation
To call an attendant group:
1. Lift the handset or press the ON/OFF key.
2. Enter the attendant pilot number (default = 0).
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
•
FF3-0: Extension Number
•
FF5-0: Attendant Hunt Groups
Considerations
•
Up to 20 extensions can be included in an attendant group.
•
The attendant pilot number is flexible.
•
If a member of an attendant group is for a virtual extension, multiple extensions in the attendant
group can be made to ring at once when the virtual number is dialed.
•
Attendant calls are always tone calls (i.e., not voice calls).
206
Verified or
Non-Verified
Non-Verified
Extension Port Based TRS
Verified
Non-Verified
Verified
Action
DBS 576 (USA), Revised 6/11/98
TRS Class
No Account Entry
Class
TRS Class for Forced
Account Code
(FF1 0 19 0001)
Intercom dial tone
Section 700 - Operation
Account Entry
Extension Port Based TRS
Class
Account Code Based TRS
Class
Extension Port Based TRS
Class
Account Code Based TRS
Class
Result
576-13-700
Advertisement
Table of Contents
