Table of Contents
Advertisement
Chapter 6. DSLT Features
To retrieve a call parked at the originating extension from another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the Call Park Answer/Other Ext. access code (default
773).
3. Dial the number of the extension that parked the call.
To park a call at another extension:
1. Press the HOLD key.
2. Enter the Call Park Transfer access code (default 774)
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
To retrieve a transfered call park:
1. At the extension with the transfered park call, lift the hand-
set or press the ON/OFF key.
2. Enter Call Park Answer/Self access code (default 772).
Hardware Requirements
•
N/A
Related Programming
•
FF1 (System): Extension Park Hold Recall Timer
Considerations
•
You cannot park more than one call at a time.
•
No more than one Call Park Answer key may be assigned to a single telephone.
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
218
Action
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
• Connected to parked call
Result
• Current call on hold
•
Result
Intercom dial tone
• Connected to parked call
576-13-700
Advertisement
Table of Contents
