Section 700 - Operation
To initiate Handsfree Operation:
1. Press the ON/OFF key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Headset Operation
CPC-96, CPC-288, and CPC-576 All Versions
Description
Headset Operation allows you to handle calls with a headset instead of with the handset or
speakerphone.
Operation
To answer calls using the Headset Operation:
Note:
If Headset mode is already on, the following procedure turns it off. If Headset mode is off,
this procedure turns it on.
1. Pick up the handset or press the ON/OFF key.
2. Press the PROG key.
3. Enter 90 for Headset mode.
4. Replace the handset or press the ON/OFF key.
Hardware Requirements
•
A headset must be installed.
Related Programming
•
FF1-0-3: Extension COS (Dial Tone Stop)
•
FF1-2: Dial Plan
•
FF3: Extension COS
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 5. Key Telephone Features
Result
Phone is offhook with access to full range
of calling features
Result
Intercom dial tone
159