Panasonic 524X07801B Technical Manual page 85

Section 700 - Operation
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the SSD Index number (1 - 2).
8. Press the HOLD key.
9. Enter the SSD Index name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
79.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 80.)
Note: Press the FLASH key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 79.
• See Example 2. Small-display phone on page 80.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD index names, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
14. Repeat steps 9-13 until all SSD indexes are entered.
15. Press the AUTO key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
2 :
SSD Index displays
Enter Index # displays
A B C D E F XXX displays (where
XXX = SSD bin number)
Next SSD index number displays
Desired SSD index number displays
Enter SSD # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
85