Table of Contents
Advertisement
Chapter 4. User Maintenance
10. Press the HOLD key.
11. Enter the desired mode for Special Day ( (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night(1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.
12. Press the HOLD key.
13. To set additional Special Day modes, press the volume up
or down key or press the HOLD key to move to the desired
mode.
14. Repeat steps 7-13 until all Special Day modes are set. (Up
to 20 special days may be entered.)
Note: The entry positions are listed in Table 10.
15. Press the AUTO key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Table 10.
Special Day Start Time/Mode - addresses & values
8107-1 (1000-1219) Hold
-- VALUES --
(MMDD, HHMM, or 0-5)
Date
Special Day 1
(MMDD)
Start Time
(HHMM)
Mode (0-5):
0=None
1=Day 1
2=Day 2
3=Night
4=Night (1)
5=Night (2)
94
Action
(MMDD or HHMM or 0-5) Hold
1st MODE
2nd MODE
1000
1001
1003
1002
1004
DBS 576 (USA), Revised 6/11/98
1002
S Day 01-1 Mode displays
Next Special Day mode displays
1-
Mode Special Day displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
-- ADDRESS NOs. (1000-1219) --
MODES
3rd MODE
1005
1006
Section 700 - Operation
Result
:
4th MODE
5th MODE
1007
1009
1008
1010
576-13-700
Advertisement
Table of Contents
