Table of Contents
Advertisement
Section 700 - Operation
Considerations
•
If disabled in Extension Programming, you must press the line key or enter the feature code for
incoming pick-up in order to answer a call.
Speed Dialing
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
•
System Speed Dial (SSD)
•
Speed Dial Linking
•
Speed Dial Name Assignment
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored
in PSD bins numbered 80-99.
You can assign up to 10 PSD numbers to the one-touch keys on a non-display or small-display phone,
and up to 20 PSD numbers to the soft keys on a large-display phone. Once the PSD numbers have
been assigned, you dial them by pressing the appropriate key. (For additional information, see "One-
Touch Keys" on page 173.)
You can also enter a name up to 7 characters for each of the PSD numbers. This allows PSD numbers
to be confirmed by name rather than by number.
Operation
To assign PSD numbers:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the AUTO key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710).
3. Enter the PSD bin number (80-99).
4. Dial the phone number.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Enter Spd Dial displays
Stored Spd Dial displays
179
Advertisement
Table of Contents
