Table of Contents
Advertisement
Chapter 5. Key Telephone Features
Operation
To leave a message waiting indication:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the phone is still ringing, or when you hear the busy
tone, enter the Message Wait Set code (default = 4).
4. Replace the handset or press the ON/OFF key.
To answer a message waiting indication (callback):
1. Lift the handset or press the ON/OFF key.
2. Enter the Message Wait Callback code (default = *6) or
press the MSG key if using a large-display phone.
To cancel a callback message:
1. Lift the handset or press the ON/OFF key.
2. Enter the Callback Request Cancel code (default = *5) or
press the MSG key if using a large-display phone.
3. Replace the handset or press the ON/OFF key.
Note:
Message waiting/callback messages may also be cancelled by either the originator or the
receiver by calling the other party.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Message Wait set/cancel)
•
FF1-0-03: Extension COS (Priority Message Wait set/cancel)
168
Action
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
MSG Accepted displays
• Message lamp flashes at called exten-
sion
• MSG EXT XXX displays (where XXX
= calling extension number) or name
of calling extension displays at called
extension
Result
Intercom dial tone
• Telephone automatically dials exten-
sion that sent the message waiting indi-
cation
• Message lamp goes off when your call
is answered
Result
Intercom dial tone
MSG Cleared displays
Message lamp goes off
576-13-700
Advertisement
Table of Contents
