Panasonic 524X07801B Technical Manual page 88

Chapter 4. User Maintenance
6. Press the HOLD key.
7. Press the HOLD key.
8. Enter up to ten-digit Verified Account Code. (All Verified
Account Codes must be unique. If there is a matching entry
entered, the System will not accept the entry and will double
beep.)
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key.
10. Enter the TRS Class to be associated with the Verified
Account Code entry.
11. Press the HOLD key to store the entry.
12. To add additional Verified Account numbers, press the vol-
ume up or down key or press the HOLD key to move to the
desired Verified Account table number.
13. Repeat steps 8-12 until all Verified Account numbers are
entered.
14. Press the AUTO key to exit the entry mode
15. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
88
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
XXX-
Verified ACCD displays (where XXX =
account code table number)
0001 : AAAAAAAAAAA
XXX:Account Cod displays (where
AAAAAAAAAAA = current account
code and XXX = account code table
number)
0002 :X
XXX:TRS Class displays (where X =
TRS Class)
0001 :YYY displays (where YYY = the
next account code table number)
Desired Verified Account table number
displays
Table Number
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-13-700