Table of Contents
Advertisement
Chapter 5. Key Telephone Features
To assign Variable Mode Functions to a Small Display Telephone
1. Press the ON/OFF key.
2. Press PROG + 95 + (XX) + Fixed Feature Code (see Table
13 on page 154)
or
press PROG + 95 + (XX) + REDIAL + Flexible Feature
Code (see Table 13 on page 154)
(where XX is the Flexible Screen position as listed below).
3. Press the ON/OFF key
To assign Variable Mode Functions to a Large Display Telephone
1. Press the ON/OFF key.
2. Using the FUNCTION EXT menu, display the desired
extension function location (see Flexible Screen Positions
below)
3. Press PROG + soft key + Fixed Feature Code (see Table 13
on page 154)
or
press PROG + 95 + (XX) + REDIAL + Flexible Feature
Code(see Table 13 on page 154)
4. Press the ON/OFF key
Flexible Screen Positions
Variable Mode Display
Position
Position 1 to 10
Position 11 to 15
Position 16 to 25
Position 26 to 30
Hardware Requirements
•
A 44-Series Display Telephone or or the VB-43225 Large Display Telephone
Related Programming
•
FF4-2: Flexible Screens
•
FF3-0: Variable Modes
196
Action
Action
DBS 576 (USA), Revised 6/11/98
The variable mode function executes
Displays at
Intercom Dial Tone/Intercom Dial
Intercom Ringback Tone
Intercom Busy Tone
Talk
Section 700 - Operation
Result
Result
576-13-700
Advertisement
Table of Contents
