Section 700 - Operation
Broker's Hold
Broker's Hold allows you to toggle between the current call and the last held call by pressing the
HOLD key.
Operation
To place a call on Broker's Hold:
1. Pick up the first call.
2. Press the HOLD key.
3. Pick up the second call.
4. Press the HOLD key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient
of the call.
CO, Extension, and Network calls may be parked.
There are two ways for an extension to park a call on the DBS 576. One way is to park the call at the
receiving extension and to retrieve the parked call at another extension by dialing the park answer
code plus the parking extension number. The other way is to park the call at another extension and dial
the park transfer answer code at the other extension to retrieve the call.
Operation
To park a call on this extension:
1. While on a call, press the HOLD key.
2. Enter the Call Park Hold access code (default 771).
3. If necessary, page the party that needs to retrieve the call.
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 6. DSLT Features
Result
First call on hold
Second call on hold, first call retrieved
Result
• Current call on hold
217