Panasonic 524X07801B Technical Manual page 107

Section 700 - Operation
.
Operation
To set a Caller ID Logging Extensions using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 10.
3. Press the HOLD key.
4. Press the HOLD key.
5. Enter log control number.
6. Press the HOLD key.
7. Dial the extension number.
8. Press the HOLD key to store the entry.
9. To set CID Log for additional extensions, press the volume
up and down key or press the HOLD key to move to the
desired Extension.
10. Repeat steps 6-8 until all extension are entered.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
576-13-700
Action
DBS 576 (USA), Revised 6/11/98
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8110-
CID Logging EXT displays
CID Logging # displays
Next log control # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
107