Table of Contents
Advertisement
Chapter 7. SLT Features
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Dial the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see "Speed Dialing" on page 276.)
5. Replace the handset.
To cancel Call Forwarding - No Answer:
1. Lift the handset.
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 733.
• For another extension, enter 753.
3. If canceling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset.
Call Forwarding and Do-Not-Disturb
The System allows you to cancel both Call Forwarding and Do-Not-Disturb (DND) for your own
extension in one step.
To cancel Call Forwarding and DND:
1. Lift the handset.
2. Enter the CF/DND All Clear code (default = 7**).
3. Replace the handset.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Call Forward/All Calls)
•
FF1-0-03: Extension COS (Call Forward/Busy)
258
Action
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Result
Intercom dial tone
Result
Intercom dial tone
576-13-700
Advertisement
Table of Contents
