Panasonic 524X07801B Technical Manual page 100

Chapter 4. User Maintenance
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
39.)
You can specify exception days which allow for a range of days for the System to operate in the Night
mode. This is intended for extended holidays for business shut down periods that last for multiple
days. You can specify up to 6 exception day periods.
Operation
To set the Exception Day Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 2.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the start date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key.
11. To set additional Exception Day modes, press the volume
up or down key or press the HOLD key to move to the
desired mode.
12. Repeat steps 7-11 until all Exception Day modes are set.
(Up to 6 exception periods may be specified.)
Note: The entry positions are listed in Table 11 on page
101.
100
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
81-
User MAINT displays
8107-
System Mode displays
2-
Mode Except Day displays
200 :MMDD
PTN 1 Start Day displays
201 :MMDD
PTN 1 Stop Day displays
Next Exception Day mode displays
Desired Exception Day mode displays
576-13-700