Table of Contents
Advertisement
Chapter 3. System Features
Related Programming
•
N/A
Considerations
•
You can only set Automatic Day/Night modes on a system-wide basis. If tenant groups require
separate Day/Night modes, you must set these modes manually.
•
You can manually override Automatic Day/Night modes. (See "Manual Day/Night Mode" on
page 38.)
Digital Pad
Description
Digital pad settings allow adjustment of call levels for different call types. There are 29 pad classes in
the System. For pad class, a volume adjustment is assigned for a connection to any pad class
assignment. The volume adjustment is between -30dB and +30 dB.
There are 8 extension pad classes and 16 trunk pad classes. In addition, there are pad classes for
conference calls, page port, MFR, RAI Modem, and Conference Call Unit. One pad class is currently
not used.
For instance, a call from an extension assigned to extension pad class 1 to a trunk assigned to trunk
pad class 3 would received the volume adjustment assigned to this connection combination.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Direct Inward System Access
(All Versions)
Description
Direct Inward System Access (DISA) gives off-site users dial-in access to the System. You access
DISA from an outside location by entering a digit number assigned to a DISA trunk.
For security reasons, sixteen incoming DISA ID codes/TRS class can be assigned. If a code is
assigned, it must be entered as soon as the DISA trunk answers.
40
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
576-13-700
Advertisement
Table of Contents
