Section 700 - Operation
Meet-Me Answer
To answer a page using Meet-Me Answer:
1. Lift the handset or press the ON/OFF key.
2. Enter the Meet Me Answer code (default = ##).
Hardware Requirements
•
External relays, amplifier, and speakers are required for external paging.
Related Programming
•
FF1-0-02: Paging Override
•
FF1-0-03: Extension COS (Paging)
•
FF1-0-04: Trunk COS (Paging)
•
FF1-2: Dial Plan
•
FF2: Trunk COS
•
FF3: Extension COS
Considerations
•
If an external paging system has been connected, pages can be made to paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
•
An extension can belong to more than one paging group.
•
Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal.
Reset Call
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
Operation
To use Reset Call to dial another extension (after a busy extension):
1. Lift the handset or press the ON/OFF key.
2. Dial an extension number.
3. Dial the last digit of the next extension number.
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 6. DSLT Features
Result
Intercom dial tone
Connected to specified party
Result
Intercom dial tone
Busy tone
237