Table of Contents
Advertisement
Section 700 - Operation
•
FF1-0-03: Extension COS (Broker's Hold or Conference)
•
FF3: Extension COS
Considerations
•
Broker's Hold must be disabled to establish a conference call.
Eight-Party Conferencing
With the optional Conference Card installed, up to 8 parties can be included in a conference call. One
of the parties can be a CO line (i.e., 8 extensions or 7 extensions and 1 CO line).
Operation
To establish an Eight-party Conference Call from the idle status:
1. Lift the handset.
2. Enter the Eight-Party Conference code (default = 788).
3. Hookflash.
4. Enter a trunk access code, or dial the number of the exten-
sion you wish to add to the call.
5. If you entered a trunk access code, dial the number of the
party you wish to add to the call. Otherwise, proceed to step
6.
6. Hookflash when your call is answered.
7. To add additional parties to the call, hookflash and repeat
steps 3-6.
To establish an Eight-party Conference Call from your current call:
1. While on a call, hookflash to place the current call on hold.
2. Enter the Eight-Party Conference code (default = 788).
3. Hookflash.
4. Enter a trunk access code, or dial the number of the exten-
sion you wish to add to the call.
5. If you entered a trunk access code, dial the number of the
party you wish to add to the call. Otherwise, proceed to step
6.
6. Hookflash when your call is answered.
7. To add additional parties to the call, hookflash and repeat
steps 3-6.
Hardware Requirements
576-13-700
Action
Action
DBS 576 (USA), Revised 6/11/98
Chapter 7. SLT Features
Result
Intercom dial tone
Connected to called party
Result
Current call on hold
Connected to called party
271
Advertisement
Table of Contents
