Table of Contents
Advertisement
Chapter 7. SLT Features
Trunk Access
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System supports the following ways to seize an idle trunk to make an outside call:
•
Direct Trunk Access
•
MCO Trunk Access
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
1. Lift the handset.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
4. Dial the phone number.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Direct Trunk Access)
•
FF3: Extension COS
Considerations
•
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
286
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Outside dial tone
576-13-700
Advertisement
Table of Contents
