Port Security Commands; Display Port-Security - HP MSR Series Command Reference Manual

Port security commands

In this chapter, "MSR1000" refers to MSR1002-4. "MSR2000" refers to MSR2003, MSR2004-24,
MSR2004-48. "MSR3000" collectively refers to MSR3012, MSR3024, MSR3044, MSR3064.
"MSR4000" collectively refers to MSR4060 and MSR4080.
The commands configured in Layer 2 Ethernet interface view are available only on the following ports:
The fixed Layer 2 Ethernet ports on the MSR1000, MSR2004-24 and MSR2004-48 routers.
•
The ports on the HMIM-24GSW/24GSWP and HMIM-8GSW switching modules installed on MSR
•
routers.

display port-security

Use display port-security to display port security configuration, operation information, and statistics for
one or more ports.
Syntax
display port-security [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify a port, this command displays port security information for all ports.
Examples
# Display port security information for all ports.
<Sysname> display port-security
Port security parameters:
Port security
AutoLearn aging time
Disableport timeout
MAC move
OUI value list
Index :
GigabitEthernet2/1/1 is link-up
Port mode
NeedToKnow mode
Intrusion protection mode
: Enabled
: 30 min
: 30 s
: Denied
:
1 Value : 123401
: NoAction
: userLoginWithOUI
: Disabled
189