Using The Autoconfiguration Adapter (Aca) - Hirschmann rsb20 Reference Manual

Basic Settings
1.6.5

Using the AutoConfiguration Adapter (ACA)

The ACAs are devices for loading/saving the configuration data of a device.
An ACA enables the configuration data to be transferred easily by means of
a substitute device of the same type.
Note: The described devices use the following AutoConfiguration Adapter:
ACA 11.
Storing the current configuration data in the ACA:

You have the option of transferring the current device configuration,
including the SNMP password, to the ACA and the flash memory by using
the "to device" option in the "Save" frame .
You have the option of transferring the current device configuration,
including the SNMP password, to the ACA and the flash memory by using
the "to device" option in the "Save" frame .
Transferring the configuration data from the ACA:

When you restart with the ACA connected, the device adopts the
configuration data of the ACA and saves it permanently in the flash
memory. If the connected ACA does not contain any valid data, for
example, if the delivery state is unchanged, the device loads the data from
the flash memory.
Note: Before loading the configuration data from the ACA, the device
compares the password in the device with the password in the ACA
configuration data.
The device loads the configuration data if
 the admin password matches or

there is no password saved locally or
 the local password is the original default password or
 no configuration is saved locally.
36
1.6 Loading/Saving the Configuration
RM Web L2B
Release 5.3 05/2012