Loading/saving settings
3.1.1 Loading from the local non-volatile memory
When loading the configuration data locally, the Switch loads the configuration
data from the local permanent memory if no ACA is connected to the Switch.
V Select the Basics:Load/Save dialog.
V Click in the "Load"-frame "Local".
V Click "Load configuration".
V Enter the command enable to change to the Privileged EXEC
mode.
V Enter the command
copy nvram:startup-config system:running-config
to load the configuration data from the local non-volatile memory.
3.1.2 Loading from the AutoConfiguration Adapter
If an ACA is connected to the Switch, the Switch always loads its configura-
tion from the ACA.
For information on how to save a configuration file onto an ACA, refer to
ving Locally (and on the ACA)" on page
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
3.1 Loading settings
57.
"Sa-
53