9
NV Media Card Operation
9.1
Introduction
The Non-Volatile Media Card feature enables simple configuration of parameters, parameter back-up
and drive cloning using a SMARTCARD or SD card. The drive offers backward compatibility for a
Unidrive SP SMARTCARD.
The NV Media Card can be used for:
•
Parameter copying between drives
•
Saving drive parameter sets
•
Saving a program
The NV Media Card is located at the top of the module under the drive display (if installed) on the left-
hand side.
Ensure NV Media Card is inserted with the contacts facing the left-hand side of the drive.
The drive only communicates with the NV Media Card when commanded to read or write, meaning
the card may be "hot swapped".
Figure 9-1 Installation of the NV Media Card
1. Installing the NV Media Card
2. NV Media Card installed
SD Card Adaptor (memory card not included)
Powerdrive F300 Getting Started Guide
Issue Number: 5
NV Media Card
8 kB SMARTCARD
64 kB SMARTCARD
Part number
3130-1212-03
2214-4246-03
2214-1006-03
101